Quote from: kenron on October 03, 2018, 03:29:23 PM

Raske, try this, with amd driver 18-5-1 i never have problems, remember to put in ur walletadress and rigname and adjust conf to as many cards u got in rig:
i use this line in claymore:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:14444 -ewal xxxxxxxxxxxxxxxx.RX580_1st_rig -showdiff 1 -epsw x -asm 1 -estale 1 -mode 1 -minspeed -175 -ftime 10 -gser 2 -eres 2 -wd 1 -allpools 1 -tstop 70 -tt 63 -ttli 73 -fanmin 50 -dbg 1 -fanmax 100 -etha 0 -cclock 1200,1200,1200,1200,1200,1200 -mclock 2195,2195,2195,2195,2195,2195 -cvddc 850,850,850,850,850,850 -mvddc 900,900,900,900,900,900 -r 60

i never use afterburner or any such prog. but i use amd compute mode and all cards have 1click bios mod

hope its helpful B-)

Observation:

You set -tstop 70 that means the miner will stop when temperatures reach 70, maybe add a -tstart 60 also to start mining again when temperatures reach 60? Also you specify -ttli 73 that will decrease mining intensity when temperatures reach 73, but you set -tstop 70 so it will never reach 73...

This is just an observation and I'm not saying it should be done like that or anything.

Thank you for posting your .bat file info.