Quote from: QuirkSilver on October 04, 2018, 08:33:15 PM

use JCEminer or SRB miner, for JCE intensity on hynix is 944 , 2 threads, 8 work size
for Micron, the most accepted is 960+896 Samsung is the same.
SRB miner doesn't allow configuring each thread so, its experimenting with values from 56 to 60 for intensity (with 2 threads and 8 work size)
CN heavy needs special straps (cryptonight in general) there is one Hynix MJR in SRBminer thread so good at 2100 mhz memory, for Samsung, afaik 3.1enhanced ubermix is the best. However i think for samsung and micron there is a lot of improvement.
GL

I got 7200 h/s. Avrage 900h/s for each cards at 1150/2150 @ 1100w on wall (too much? i use Sapphire TRIXX with -96v and -15% power) when i try to go up to 1200/2200 hashes go down xD
I use XMR-STAK 896 intensity / 8 worksize / 2 threads. I dont know maybe SRB Miner or JCE is better. But its running stable now I don't want to disturb it hehe Tongue

I had used old BIOS mods and old PBE, I had upgraded my PBE and one straps agian, but i didnt chose UberMix 3,2 (was no so good for me) i chose 3.1 was much better. and "GOOD hynix" now "universal". (The "FIX" for me to go from 800 -> 900 h/s.)