Quote from: dannymack on January 25, 2014, 05:59:37 PM

Quote from: Powell on January 21, 2014, 11:04:38 PM

Take your laptop over to the Miner and connect an ethernet cable into it and connect the other side to your laptop. Then...

http://i.imgur.com/lBFnQSD.jpg

Pick your Local Area Connection (you should only have 1, but I run my desktop via NIC Teaming so it says #4). The icon will look the same. Double click of course.

http://i.imgur.com/41rvSdo.jpg

Click the Properties button (highlighted)

http://i.imgur.com/fnEs0on.jpg

Click Internet Protocol Version 4 (TCP/IPv4) and click properties.

http://i.imgur.com/veTsV7n.jpg

Check Use the Following IP Address:

http://i.imgur.com/fKvfEV2.jpg

You can hit ok as you do not need any other setting for setting up the miner. You will have to go back to this and set it to Obtain Automatically when you have the miner setup.

Next open whatever web browser of your choice.

http://i.imgur.com/CWPV5zL.jpg

YOUR IP will be the one on the case. It should bring you here.

Click Network up top and click the edit button.

http://i.imgur.com/e3GD2DQ.jpg

Then set the IPv4 address to 192.168.1.(Whatever number so you can connect to it instantly).
(EXAMPLE since you have 192.168.1.XXX subnet).
IP Address: 192.168.1.20
Gateway (Router IP): 192.168.1.1 (or if you have UVerse or anyone else that uses 192.168.1.254 for their modems).
Custom DNS: Whatever you set for gateway.

http://i.imgur.com/JBlEasc.jpg

Click save and apply. It should eventually become non-responsive and at that point you can connect your Miner to your router and can access it from the PC. You will use the IP Address you set to connect to it. Also remember you need to turn your laptop back to DHCP (Obtain IP Address Automatically).

Thank you so much for detailing exactly what to do!!!!

Followed everything to the t, but when I reset to obtain auto and then tried to access the ip I set, it could not connect.

Any thoughts on what to do now?

Thanks so much for this. I'll quote the whole thing so others might see it as well who are as newb to this as I am