...snip...
Does yours also state in the kernal log about - -
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic)
And
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
I don't have a dr3, just trying to see if there's a underlying issue
Those messages are fine and can be ignored.
The set_temperature_offset_value_chain_sensor() is simply a function that is called associated with auto-fans. Try manual fans at 100% and see if it helps.