here is my feedback.
got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
and this is the results
hash rate quite erratic but never higher than 5GH
nicehash stats
any feedback or suggestion, very welcome
How did you get the extra fan controls?got the miner 3 days ago
to make it go online had to change the ip to .10 instead of .100 and put manually DNS server name
then tried different pools. nicehash, MPH, powermining. all same performance, 1 board not hashing fine.
changing frequency doesn't seem to do a big deal, with 900 one board stays dead all the time, with 800 dies after a while.
sent message to crypto drilling (shop I bought) and told me to freq 845 (which I can only put 850)
waiting for their technical team to reply..
this is my configuration
Code:
{
"pools": [
{
"url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347",
"user": "3GKgz3dj7nE3NFdrEECKdqjQf1US5rz6YR",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4535",
"user": "MErJBFcuRdAYCSidG3P8UQYmXVFmhpK53j",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
"user": "roberto_f.zig",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "850",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "3",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": true,
"lyra2rev2-cutoffenable": true
}
"pools": [
{
"url": "stratum+tcp:\/\/lyra2rev2.eu.nicehash.com:3347",
"user": "3GKgz3dj7nE3NFdrEECKdqjQf1US5rz6YR",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/pool.powermining.pw:4535",
"user": "MErJBFcuRdAYCSidG3P8UQYmXVFmhpK53j",
"pass": "x"
},
{
"url": "stratum+tcp:\/\/hub.miningpoolhub.com:12018",
"user": "roberto_f.zig",
"pass": "x"
}
],
"api-allow": "W:0\/0",
"api-description": "cgminer 4.11.1",
"api-listen": true,
"api-mcast-addr": "224.0.0.75",
"api-mcast-code": "FTW",
"api-mcast-des": "",
"api-mcast-port": "4028",
"api-network": true,
"api-port": "4028",
"expiry": "120",
"failover-switch-delay": "300",
"log": "5",
"queue": "9999",
"scan-time": "60",
"shares": "0",
"lyra2rev2-clk": "850",
"lyra2rev2-vol": "0",
"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",
"lyra2rev2-cutofftemperature": "50",
"lyra2rev2-cutofffanspeedin": "100",
"lyra2rev2-cutofffanspeedout": "100",
"lyra2rev2-restarthashrate": "3",
"lyra2rev2-restartfailedcount": "100",
"lyra2rev2-fan": "LV1",
"lyra2rev2-check-testnonce": true,
"lyra2rev2-scan-serial": "\/dev\/ttyS3",
"lyra2rev2-restartenable": true,
"lyra2rev2-cutoffenable": true
}
and this is the results
hash rate quite erratic but never higher than 5GH
nicehash stats
any feedback or suggestion, very welcome
Hy btc2017btc2017
There is no fan control for this miner.
To see those "controls" for the fan, you need to activet the option "Auto Stop Miner".
But there you can only tell the miner to stop working if the fans turn lower then the value you set.