Quote from: SEA1138 on November 03, 2018, 03:58:22 AM

I get an error after configuring the config_example:

Code:

* Line 8, Column 5
Missing '}' or object member name

I don't see why. Line 8, column 5 is exactly the same as the original config_example

The full error is as follows:

Code:

20181103 03:57:07 ERROR: Can't start miner, can't parse json: {
// List of main and failover pools
"pools": [
{
"user": "RUf8ZiAuPAmiA9jxfUZjP64fqPAtXSQTVH",
"url": "stratum+tcp://eu.bsod.pw:2176",
"pass": "d=3.8,c=RVN",
},
{
"user": "RUf8ZiAuPAmiA9jxfUZjP64fqPAtXSQTVH",
"url": "stratum+tcp://yiimp.eu:3666",
"pass": "d=3.8,c=RVN",
},
{
"user": "RUf8ZiAuPAmiA9jxfUZjP64fqPAtXSQTVH",
"url": "stratum+tcp://rvn.virtopia.ca:3333",
"pass": "x",
},
{
"user": "RUf8ZiAuPAmiA9jxfUZjP64fqPAtXSQTVH",
"url": "stratum+tcp://minepool.com:3636",
"pass": "d=3.8",
}
],

// Telnet API bind address.
"api-bind-telnet": "0.0.0.0:4068", // Set to "0" to disable Telnet API

// HTTP API bind address.
"api-bind-http": "0.0.0.0:4067", // Set to "0" to disable HTTP API

// If set to true enables json response for Telnet API.
"json-response": false,

// Connection retries count. After this number of attempts failover pool will be switched.
"retries": 5,

// Pause in seconds between retries.
"retry-pause": 10,

// Maximum time in seconds your pool connection may have no ping. After that reconnect will happen.
"timeout": 180,

// Name of mining algorithm. You can see available names at the top of the help file.
"algo": "x16r",

// This is GPU index in the system. You can select multiple GPUs sequentially: "devices": "0,2,3"
"devices": 0, // Use only the first GPU in your rig. Remove this parameter to use all GPUs

// Intensity used with your GPUs. It can be different for each GPU, e.g. "intensity": "20,21.4,23"
"intensity": 19,

// Sliding window length in sec used to compute average hashrate.
"hashrate-avr": 30, // Set to 3600 to get average over an hour

// Path to the log file. If only file name set log will be saved into directory with the miner.
"log-path": "t-rex.log",
// "log-path": "/home/x/t-rex.log", // Absolute path

// Set process priority (default: 2) 1 below normal, 2 normal to 5 highest.
"cpu-priority": 2,

// Shutdown miner immediately if has any CUDA error.
"exit-on-cuda-error": true,

// Shutdown miner immediately if pool connection lost.
"exit-on-connection-lost": false,

// Forces miner to immediately reconnect to pool on N successively failed shares (default: 10).
"reconnect-on-fail-shares": 10,

// User protocol logging.
"protocol-dump": false, // Set to true to turn it on.

// Configurable GPUs report frequency. By default every 5 shares.
"gpu-report-interval": 5,

// Disable color output for console
"no-color": false,

// Quiet mode. No GPU stats at all.
"quiet": false,

// Shutdown miner after timeout in sec. By default disabled. (set to 0)
"time-limit": 0,

// Disables device till miner shutdown in case of overheat. Limit in Celsius. (set to 0)
"temperature-limit": 0,

// GPU temperature to enable card after it's been disabled. (default: 0 - disabled)
"temperature-start": 0
}

* Line 8, Column 5
Missing '}' or object member name

20181103 03:57:07 T-Rex finished

I believe the issue is the extra trailing comma after "pass": "d=3.8,c=RVN", and other pass fields