Quote from: fistsofgod on November 04, 2018, 06:25:46 AM

FTW: nvidiaInspector.exe -setBaseClockOffset:12,0,100 -setMemoryClockOffset:12,0,440 -setPowerTarget:12,51
SC: nvidiaInspector.exe -setBaseClockOffset:2,0,100 -setMemoryClockOffset:2,0,420 -setPowerTarget:2,64

1.06 stats:
FTW @ 100,440,50
45.1 Sol/s
89.6 watts
SC @ 100,420,64
43.2 Sol/s
92.7 watts

1.07 stats:
FTW @ 100,440,50
45.9 Sol/s
90.2 watts
FTW @ 100,440,51
46.2 Sol/s
91.7 watts
SC @ 100,420,67
44.3 Sol/s
98.5 watts

I tied 1.07 with the original OC settings on the SC cards but power draw went up and sols went down so i tried other settings of higher power to see what happens. efficiency just went down. i also tried lower power settings, eff still decreased. I decided to use 1.06 on the SC cards and 1.07 on FTW cards.

Unfortunately I'm unable to achieve 5-10% performance increase as stated in 1.07 notes. from 1.06 at 50% power to 1.07 at 51% power sol's went up little under 3% but power also went up little over 2%. 1.07 on the FTW cards at 51% PL is about the same efficiency as 1.06 at 50% PL

still need to do more comparisons at higher pl

Could you take a screenshot ?! I just can not get the card to work under such conditions as you write? Your FTW has a base frequency of 1067MHz! + 100=1700MHz, at such a frequency and a minimum PL, the card works at least 780Mv, and it can not be 90W .