Quote from: ku4eto on November 08, 2018, 07:32:46 AM

Quote from: todxx on November 08, 2018, 07:07:43 AM

Quote from: ku4eto on November 08, 2018, 05:49:05 AM

Okay, i tried 0.3.7.

There is an issue when starting the miner and the GPUs.

For some reason, one of my GPUs will NOT initiate properly (first was GPU2, now is GPU1), and it will run at only 1 thread, the other thread is seemingly crashed, since it spews 500+HWs per 30 sec. Running 0.3.6 is all OK.

Hi ku4eto,

These stability issues seem to have no end. It seems like every time we change something to get some rigs to be more stable, some else's start having problems.

That said, can you provide a bit more information about your rig and how the miner is behaving?
What OS are you running?
What version drivers are you using?
What GPUs are you running?
Can you post the output of the miner when it is having the issues you described?

This information would help us a lot in trying to find the cause of the problem.

The issue seems to be coming from the CN_CONFIG, for some reason, it did not like `8-7`. When i changed it to `7-7`, it started okay.

Also, the hashrate seems to have increased as well, gained ~60-70h/s total.

OS is Windows 10.
Drivers are 18.2.1.
The GPUS are 1x570 and 3x580.
The output was normal, just showing hw: ### for 1 random GPU (the one that does not initialize properly). And it keeps mining as if nothing happens (at lower hashrate though).

Great! So the 7-7 config got your rig running without problems?
The auto-detect for config is some times a bit over-aggressive and will select configs that might be a bit too high, like 8+7 on 4GB cards.
In our experience, 8+7 can sometimes work on 4GB cards if they don't have a monitor connected to them and usually works best after a fresh reboot.