Quote from: BTCsovjet on January 29, 2014, 07:48:57 PM

I have powered up my miner and connected the ethernet-cable to my laptop. But I cant access the Antminer via its IP.

Whats wrong?

Edit; I followed this (https://bitcointalk.org/index.php?topic=344970.0) guide at first, changing the network settings and w/e. But now I se other guides that just connect miner and pc and then just type in the IP in the browser to access the miner.

Now nothing works.. Grin

That guide is a bit out of date I think.

All the antminers I've received from Bitmain have been set to 192.168.1.99
so you need to set your computer to 192.168.1.98 or whatever (not 99) with a mask of 255.255.255.0 - don't bother about the gateway or dns because you won't be using them for this.
Then type 192.168.1.99 into the URL line of your browser and press enter.
You should then be presented with the login page of the antminer.
Once you have set the antminer to DHCP or an address that will talk to your router/ADSL box/modem/whatever and clicked on the save/apply button, you will then have to set you computer IP back to what it was before or just select DHCP so it does it itself.
You should then have everything talking to each other.
If you set the antminer to DHCP you can look in your modem/router's device status pages to find the list of attached hosts which should show the antminer and it's associated IP address.