Sorry, I have to combine my posts, the forum is restricting how much I can post.

ImI: We will begin releasing utilities and updates soon. Initially only for Linux-based systems though. I'll post them as soon as they are ready!

ninjarobot: Thanks, let me know if you still have stability problems.

spectre2112: I'm not sure what aux connector you are referring to. If you can attach a picture, that will help. If it's the 5-pin white connector, that's the one that provides +5v standby power to the board, and also enables the board to turn on the PSU. (+12v)

If anyone else is having stability problems, it would help to have a detailed log of the issue. You can create a temporary log by putting the following line in your "Extra cgminer prarmeters" which is located under the "Settings" tab in your MinePeon web interface:

Code:

--verbose --monitor 'cat > /opt/minepeon/http/log.txt'

Be sure to get the single quotes and spaces correct. Incorrect data entered in this box can break your system! Note that this will now be logging a large volume of text to your SD card, which is a bad idea, as it will rapidly wear out if it has to log all that data. So be sure to restore the original settings (default is blank) after your logging session.

If your log is getting overwritten too much because the session keeps dying, simply add an additional ">" to the existing one, with no extra spaces. This will cause it to append the logs instead of overwriting them.

Once you have seen the problem occur, you can access the log file at: http://ip.of.your.minepeon/log.txt

If you are not sure of your IP, you should be able to find it by visiting http://setup.hashfast.com/.

If you can then zip up the log file and upload it somewhere where you can share it, such as https://mega.co.nz/ , We will then be able to take a look and see what's going on. This feedback is useful to us so we can improve things!

-Phil