Quote from: NiteShdw on February 01, 2014, 06:46:12 AM

I restored my minepeon settings and it completely corrupted my miner-start.sh file. Clicking "default" in settings doesn't replace it. Can someone post the hashfast firmare miner-start.sh file?

Hi NiteShdw,

Sounds like you have an old version.

I recommend you backup your MinePeon settings (bottom of settings page), then reflash a new image onto your SD card, let it boot, then after 3 minutes or so it should have all the updates and then you can go back to the settings page and restore the backup.

Here are the instructions:
1. If running MinePeon, first make a backup from the Settings tab (near the bottom).

2. Download this SD card image: Windows: http://setup.hashfast.com/hashfast-minepeon-1.0.zip Linux: http://setup.hashfast.com/hashfast-minepeon-1.0.img.bz2

3. If running windows, we recommend the Win32DiskImager: http://sourceforge.net/projects/win32diskimager/, If running Linux, you can simply type:

Code:

bzcat hashfast-minepeon-1.0.img.bz2 | sudo dd bs=1M of=/dev/xxx

(Where /dev/xxx is the device name of your SD card. If unsure, type "dmesg" after inserting your card.)

4. Boot RPI with the new SD image. Note that it may take up to 2 minutes to collect current updates from us before it will begin mining. You can browse here to see when your system comes online and what it's IP address is: http://setup.hashfast.com/. If for some reason it doesn't come up after a few minutes, power-cycle it. (We've seen some brands of SD card cause it to hang on reboot)

5. Log into the web interface and restore your backed up MinePeon settings (if any). Note that the RPI will generate a new wallet when you first boot from the new SD image, and will begin mining using that wallet. It's important to switch your mining settings using the "Pools" tab so that your mining proceeds end up in the right wallet!

6. If you have any problems, please post them here and I'll do what I can to help. I'll try to check in here at least once a day.

-Phil