Quote from: tboy32c on December 31, 2018, 03:48:48 PM

Is 0483:5740 STMicroelectronics STM32F407 the result you have currently? If so, are you also saying you do not see the blue LED at all? IF the STM has my firmware, AND it is in RUN mode (as your last result would indicate), AND sgminer is not running (as indicated by your previous post where you ran the miner-stop script), then the blue LED should be flashing (especially if you also ran the reset_stm script as previously indicated).

Try this next if you would:

Put the desired .bin firmware file in /media/boot
Make sure the filename starts with a capital G
Run md5sum /media/boot/G*.bin -what is the result?
Run python /usr/bin/update_fw.py & please post the entire output of that command

Bus 007 Device 002: ID 0483:5740 STMicroelectronics STM32F407 is the current result, blue LEDs are up, sgminer is running (with your firmware).

root@Baikal:~# md5sum /media/boot/G*.bin
d806968a965a7499b026ee558073af54 /media/boot/GX10.bin

root@Baikal:~# python /usr/bin/update_fw.py

Downloading... /media/boot/GX10.bin
dfu-util 0.8

Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2014 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to dfu-util@lists.gnumonks.org

dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
Opening DFU capable USB device...
ID 0483:df11
Run-time device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuERROR, status = 10
dfuERROR, clearing status
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash "
Downloading to address = 0x08000000, size = 16616
Download [=========================] 100% 16616 bytes
Download done.
File downloaded successfully
Transitioning to dfuMANIFEST state
Done