Quote from: thereal35 on January 09, 2019, 05:49:53 PM

Heads up,
I couldnt get this Miner to successfully run my 6x1070 rig.
Turns out that the 16gb Virtual memory i had set on Windows was not enough.
Bumped it up to 18gb (18432) and it was able to start mining.
It actually seemed like it wasnt going to run, and eventually fired up.
I think i need to bump up to at least 20gb virtual mem, but do not have that available on this rig.
Im going to hook up another SSD and set the virtual mem to it instead.

I had the same issue trying to run another miner (BEAM).
even though i have 8gb ram and all 6 GPUs have 8gb, the virtual memory was not enough on my system to run it.
(A 60gb ssd in windows does not hold up over time)

hope this helps someone.

Hi thereal35,
thank you for sharing your findings with everyone.
Indeed page file needs to be set to high values. To be on the safe side, the best is to set it approximately to the sum of all GPUs memories.

Others have also shared some thoughts/experiences on this matter. See:
https://bitcointalk.org/index.php?topic=4767892.msg48173601#msg48173601

Cheers