Quote from: Fastpow on February 04, 2014, 06:15:07 PM

Quote from: whatthephil on February 04, 2014, 06:07:47 PM

give me your exact settings are plug it straight in. and ill screenshot what im getting

Edit:
Okay found your settings
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A

C:\vertminer\cgminer.exe --scrypt -o stratum+tcp://vtc.kilovolt.co.uk:3333 -u Username -p Password-w 256 -I 13 -g 2 --lookup-gap 2 --gpu-engine 1000 --gpu-powertune -20 --gpu-memclock 1490 --thread-concurrency 8193

ive tried it already but ill try again and screenshot it

I might add, i've got the MSI R9x 280x gamer 3gb. Seems to be giving the most kh/s from the 280x series so you might see a little difference

That's not the initial problem though. My problem is the Intensity and the TC.

Ok here's what happened with your settings and anyone else's
http://gyazo.com/5c0e884e75cdc03c3e2fdc39bfc32094

The reason its failing is because the TC is too high. So I lower it to 6080 and it starts running. HOWEVER, then comes the problem with intesity levels. Anything above "I- 12" with gives me tons of HW

Also yes I agree there should be a difference from my card and your card, but my card is normally 700khs it should ATLEAST hit 300khs (not even 50% yet). 350Khs would be my 50% mark

Edit:

I took your settings and lowered the TC to 6080. I am getting a solid 320Khs but the HW is going crazy

Here's the screenshot (running for 20seconds or so)
http://gyazo.com/c18d54fafbf80a9b0cb4fea4a1baeee6

Should I just ignore the HW? I know I probably shouldnt but there's no way around this... If I lower the Intensity to 12 it works fine no HW, but gets 230Khs

Edit:

hmm the HW actually have seem to gone down from what I was getting before. Im only at 90 HW after a few minutes and NO rejected shares. Is it worth ignoring guys? Or should I never let it have any HW?