Quote from: KhunChan on January 24, 2019, 02:46:03 PM

Quote from: chrysophylax on January 24, 2019, 02:35:47 PM

Quote from: KhunChan on January 24, 2019, 02:27:34 PM

bminer 1080ti 7.0-7.4 G/s 925mV ~ 180w.

If regulated through Pl. (75%) then the voltage per core is above 1000mV, then the video card does not work well. Lower consumption is higher hashrate, does not sound likely, but it is a fact! Deliver a fixed voltage of 925 mV and add overclock on the core, which would be about the same value as with 75% pl.

I compared the bminer and gminer on a grinmint bminer gives a larger hash, but a rather high percentage of rejects. The gminer gives a slightly smaller hash rate, but this is offset by the lack of rejects. It should be borne in mind that the gminer loads the processor more than the bminer. The next test that Ill run is bminer on f2pool (bminer has fewer rejects on this bullet) and grinmint on gminer. 2 identical rig. I like both the miner and the competition between them.

In our mining experience ...

Less rejects is MUCH more favourable than higher hash. We (specifically I) have been a miner since the beginning, so in my books, gminer with less rejects will amount to a much better track record than a higher hashing miner with much more rejects. As I look at this in the coming days, it is specifically for the CWI IntraMining System, so I would only every go for the most optimized version.

These versions of course would need to work with Fedora 27/29 x64 OS as all our miners are based on Fedora 27 currently, with a couple CentOS 7 and Fedora 29 miners as well.

Seems you get good figures. What cards are these 1080TI?

#crysx

1080ti maps of my friend. I just told him how to fix the voltage, without touching the sliders adjust Pl. If I had 1080 I would send them to c31 =)

I have only 1070 and 1070Ti. 8 * 1070Ti bminer - 36.6 / gminer 34.8 - 900mV

Regarding rejects. Bminer has a problem not on all pools. Therefore, it is not correct to say that he is worse / better than the gminer.

At the moment, both miners are actively developing. You have to choose the pool and miner that will be better for you.

Thanks ...

Stratum is always a difficult thing to tweak to miners, so I assume this is what may be the thing that could be the pivot to performance. I will ask our Developer and see what could be setup, and if not too much issue, maybe add it to our Citrine Mine also. Seems to be a great many mining, so it would be interesting to see.

#crysx