Quote from: Stoyvo on February 07, 2014, 07:15:22 AM

I've received my batch! I set up 4 of them to test... i've been running into issues:

First Issue:
Steps:
1) Installed Software
1) Changed to LTC only
2) Entered pool information
3) Switched the dip switch to LTC (L or T)

Result:
No hash rate what-so-ever. LTC stats showed 0.000 mh/s, same with cgminer.

Solution:
set the param: --dualminer-pll 800

moving onto the second issue...

Second Issue:
Hardware Errors...
I let the USB miners run for aprox 2-3 hours with a fan on them to keep cool... I'm getting Hardware Errors! Does anybody know what this is about?

I have posted more information regarding the hardware errors here: http://www.reddit.com/r/litecoinmining/comments/1x9777/dualminer_usb_hardware_errors/

All USB asics get HW errors, 388 each on a row of 6 in 6days runnin.
Some are real (affect shift) most are fake and should be ignored.
5 errors in 2500 good accepts is not bad.
CPU and GPU I had no errors ever.
USB well they all do that, it is when 1 shows way more than the others, or like 200 in the first few mins, ya got a problem. usually lack of power to hub or incompatible hub. None of the USB stuff like USB 3.0 specs much.
They all adhere to USB 1.1 and 2.0 using 1.1 speeds to talk to bus.