Quote from: philipma1957 on March 02, 2019, 03:35:01 PM

Quote from: gogo64 on March 02, 2019, 11:19:55 AM

Hello, I changed the fan, which was noisy. I put it there:
https://store.supermicro.com/92mm-fan-0114l4.html
It works well, only mine minerals hold 70.5 c and not 66 as the original fan.
Is it possible to set the fan speed to increase in automatic mode from about 66 c?
(google translator)

try setting fan speed manually to 30
btw that is a good fan maker. I may buy the fan thanks.

I set the stock fan to 20% fixed speed = 2760 rpm
I run balanced
I get
69.19 c = miner
52.63 c = mcu

Phil, I noticed in your post on Feb. 7 that with the same settings your miner temp was 63 deg c. Assuming the diff is due to room temp. May be helpful to know the room temp when setting a fixed speed.