Quote from: NCarter84 on March 15, 2019, 09:25:48 PM

Quote from: MaxHa$h on March 15, 2019, 09:05:33 PM

Quote from: NCarter84 on March 15, 2019, 06:52:03 PM

Quote from: MaxHa$h on March 15, 2019, 11:51:39 AM

Quote from: NCarter84 on March 14, 2019, 05:06:12 PM

Quote from: P00P135 on March 14, 2019, 04:01:54 PM

Quote from: NCarter84 on March 14, 2019, 03:20:48 PM

I have a power color RX570 4gb card that just dies in after about 10 mins.... Running 1200 core with 900-1000mv and 2025 memory with 925-1000mv... setting TRM at 8+6.

Any thoughts?

Try 2000mem 8+8 or 8+7

All my 4gb cards seem to crash on 8+8 or 8+7, so been running them really well (940-975hs) on 8+6.

Ironically i get over 1KH/s on all 4gb 570/80's with 6+6 and over 900 H/s on 8gb with 8+8 (Zero crashes or restarts)
https://ibb.co/17FN2xf

I tested that, my cards hit 900 hs with 6+6 -- what core/memory are you running?

Core clk 1250 Mem clk 2100

One card has core @ 1325 and one other has 1350 but that's because of the type of GPU
If you have issues you have to up the core voltage alil

I highly recommend tuning all cards using HW 64 info this way you can actually look at the memory errors and see if they start skyrocketing you know it's going to crash but if they're just getting a memory error slowly or not at all they should run forever I was thinking about making a guide on how to properly tune graphics cards for maximum hashrate as I did once for the 550's to get over 500Hs over a year-and-a-half ago

Edit: what make and model graphics card are you using

Yeah - I've been around awhile and use HWInfo to check to ensure everything is getting applied correctly and to watch for errors.

Rig I tested on has (5) RX470 Shappire Mining Cards 4 GB and (1) 570 Shappire Nitro 4 GB.

I run the mining cards at GPU 1200/925mv and Memory 2100/900mv, the Nitro runs at the same settings. HW Errors listed is limited/slow leak.

Have you tried upping the MV on the core clock creeping slowly to 1100 if needed 1150 Max on one card I have wattage is not raise that much but I've seen maybe 5 to 8 watts Max. Also occasionally rebooting while tweaking sometimes we'll get the hashrate swear they need to be and then they'll hold on future restarts if needed