Quote from: temen on February 09, 2014, 09:55:03 AM

Hi

How it's possible to make script that copies my own cgminer.sh script to /etc/init.d/cgminer.sh on startup?

And how to make script that restarts the miner with like 3 hour intervals? As there has been some downtime with overclocking and unit just shutting down=)

now 500gh/s semi-stable 2 module november saturn, was on during the night. Started clocking each die individually. To make it stable i needed to get rid of those fault 4:s turning up after some time. I think they have timer on them and that causes some overtemp-protection to trigger in after some time.

Values for asic 4 are 361 and asic 0 varies in between 361 and 2C1.

Description=cgminer 3.9.0|SUMMARY

MHS av=503541.30
MHS 5s=503582.25

Work Utility=7034.48
Difficulty Accepted=245831.00000000
Difficulty Rejected=1248.00000000
Difficulty Stale=0.00000000
Best Share=376240
Device Hardware%=0.1790
Device Rejected%=0.5065
Pool Rejected%=0.5051
Pool Stale%=0.0000|

ASIC Board    Info
0

Temperature sensor: 46.0 C
Die ID    Cores ON    Cores OFF    %
0   48   0    100
1   48   0    100
2   48   0    100
3   48   0    100
DC/DC ID    ON/OFF    Status    Input Voltage    Output Voltage    Output Current
0    OFF    OK    11.5 V    0.82 V    35.2 A (28.9 W)
1    OFF    OK    11.4 V    0.822 V    34.6 A (28.4 W)
2    OFF    OK    11.3 V    0.815 V    37.5 A (30.6 W)
3    OFF    OK    11.4 V    0.817 V    37.7 A (30.8 W)
4    OFF    OK    11.3 V    0.821 V    35.9 A (29.5 W)
5    OFF    OK    11.4 V    0.818 V    36.1 A (29.5 W)
6    OFF    OK    11.3 V    0.826 V    29.5 A (24.4 W)
7     OFF    OK    11.3 V    0.82 V    30.2 A (24.8 W)
4

Temperature sensor: 47.5 C
Die ID    Cores ON    Cores OFF    %
0   48   0    100
1   48   0    100
2   48   0    100
3   48   0    100
DC/DC ID    ON/OFF    Status    Input Voltage    Output Voltage    Output Current
0    OFF    OK    11.5 V    0.82 V    38.2 A (31.3 W)
1    OFF    OK    11.4 V    0.821 V    37.8 A (31 W)
2    OFF    OK    11.5 V    0.822 V    37.4 A (30.7 W)
3    OFF    OK    11.5 V    0.817 V    37.6 A (30.7 W)
4    OFF    OK    11.5 V    0.821 V    37.5 A (30.8 W)
5    OFF    OK    11.4 V    0.816 V    37.8 A (30.8 W)
6    OFF    OK    11.5 V    0.816 V    36.6 A (29.9 W)
7    OFF    OK    11.4 V    0.817 V    36.6 A (29.9 W)

Total DC/DC power output: 471 W

vrm's for asic 0 die 3 make fault 4 risen above that 30. Asic 0 is heating more than 4 in overall.

has anyone tried this with an oct junit with 8 activted VRMS? i wonder why everyone with with 8 vrms boards oct reaching only 790Gh/s max.