Quote from: BitMaxz on March 28, 2019, 09:39:04 PM

https://images-na.ssl-images-amazon.com/images/I/81nBVjsVxgL._SY550_.jpg

So that the noise only inside the cooler jag.

Please do not commit this mistake. IF you are going to use a box, do NOT attach the ducts directly to the fans. You can attach them to the box, but leave the miner and PSU free inside, you specially do not want to do what that picture shows. Airflow must ALSO go around the miner, otherwise you will burn the controller. You have been warned.

Quote from: abeandund on March 29, 2019, 02:17:17 AM

I was looking at this adapter

https://mobileimages.lowes.com/product/converted/063467/063467850236.jpg

This adapter is not needed at all. If you follow my advise, you don't have to worry about such thing. You can simply make two 6" holes to the box on each side instead and attach insulated ducts to those, no adapters.

Wood and insulating fabric works very well:

Notice the ducts are not attached directly to the fans, this is important, airflow must also go around the miner, not only inside the Asic boards.

Think something like this: