Quote from: krazietek on February 09, 2014, 07:48:08 PM

Just so i don't want to leave the thread with what ended up being the issue with my Sapphire 7950.

1. I did not have the set allocation at the beginning of my batch file. I did do it in DOS but for some reason the memory was still being allocated.
What this did was allow me to get over the TC - 8192. Also I added the "del *.bin" at the top of the batch file because of what i read the .bin files can cause issues.

del *.bin
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_MAX_ALLOC_PERCENT 100

2. Also i re-installed windows due to GPU-Z was telling me my AMD drivers were having errors. I was playing with different drivers maybe they all did not get removed properly and causing conflicts.

3. I was having a issue where every hour or so my PC would shut down and i noticed that the USB devices were going to sleep. I had all ready ran through my power settings ensuring they were set to "never sleep/shut down", but i did not do it to the USB or the PCIe settings so i am assuming that did help and or issue #2 might have had something to do with that as well.

I am running at about ~660 kh/s.

Thank you for all the replies! Cool

2. You are advised to remove a driver completely before installing a new one.
http://support.amd.com/en-us/kb-articles/Pages/GPU57RemoveOldGraphicsDrivers.aspx

3. Is your GPU overheated?