Quote from: TrailingStop on April 27, 2019, 04:13:40 PM

Quote from: c0mrade69 on April 27, 2019, 03:52:03 PM

Quote from: TrailingStop on April 27, 2019, 03:35:40 PM

Quote from: c0mrade69 on April 27, 2019, 03:06:17 PM

Hello, Im getting randomly these error:

16:43:00.036 GPU[0]: 2.427 MH/s CClk:1.607 GHz MClk:3.999 GHz 37C 50% 32W 75.834 kH/W [A49:R2 3.9%] LastShare: 00:03:09
16:43:00.037 GPU[1]: 2.437 MH/s CClk:1.607 GHz MClk:3.999 GHz 38C 50% 31W 78.623 kH/W [A44:R1 2.2%] LastShare: 00:01:57
16:43:00.037 GPU[2]: 2.320 MH/s CClk:1.607 GHz MClk:3.999 GHz 36C 50% 31W 74.837 kH/W [A37:R0 0.0%] LastShare: 00:04:05
16:43:00.038 GPU[3]: 2.332 MH/s CClk:1.607 GHz MClk:3.999 GHz 38C 50% 31W 75.218 kH/W [A47:R0 0.0%] LastShare: 00:04:06
16:43:00.038 Rig-Speed[2 min]: 9.516 MH/s 125W 76.126 kH/W [A177:R3 1.7%] Uptime: 00:52:33 LastShare: 00:01:57
16:43:12.082 POOL: Received new job#: 169c
16:43:12.084 Miner: Error ******** GPU[0] CudaError: 702
16:43:12.085 Miner: Error ******** GPU[0] Not enough memory to run algo. GPU disabled.(0/1)
16:43:12.087 Miner: Error ******** GPU[0] Please check if your Virtual Memory setting is OK. You can also try to
16:43:12.088 Miner: Error ******** GPU[0] reduce the intensity/grid-size command line value to fix this problem.
16:43:12.089 Miner: Error ******** GPU[1] CudaError: 702
16:43:12.090 Miner: Error ******** GPU[1] Not enough memory to run algo. GPU disabled.(0/1)
16:43:12.091 Miner: Error ******** GPU[1] Please check if your Virtual Memory setting is OK. You can also try to
16:43:12.092 Miner: Error ******** GPU[1] reduce the intensity/grid-size command line value to fix this problem.
16:43:12.099 Miner: Error ******** GPU[2] CudaError: 702
16:43:12.099 Miner: Error ******** GPU[2] Not enough memory to run algo. GPU disabled.(0/1)
16:43:12.103 Miner: Error ******** GPU[2] Please check if your Virtual Memory setting is OK. You can also try to
16:43:12.106 Miner: Error ******** GPU[2] reduce the intensity/grid-size command line value to fix this problem.
16:43:12.108 Miner: Error ******** GPU[3] CudaError: 702
16:43:12.111 Miner: Error ******** GPU[3] Not enough memory to run algo. GPU disabled.(0/1)
16:43:12.114 Miner: Error ******** GPU[3] Please check if your Virtual Memory setting is OK. You can also try to
16:43:12.115 Miner: Error ******** GPU[3] reduce the intensity/grid-size command line value to fix this problem.
16:43:12.116 Miner: Error ******** All GPUs are disabled. TT-Miner cannot continue and will exit now
16:43:12.125 POOL: Lost connection to zcoin-eu.mintpond.com:3000
16:43:12.126 POOL: Mining temporary stopped

Happening after 10, 30 , 60 minutes. randomly.. any clue ?

This is my config:
-A MTP-100 -P stratum+tcp://abcdefghasjdhaklsdjallkajdl.worker:x@zcoin-eu.mintpond.com:3000 --api-bind 127.0.0.1:4033

I tried different intensity or grids..
gtx 1070 ti
using latest NVIDIA drivers
8 GB RAM, 32 GB virtual memory, Celeron CPU

PS: what OC is best for gtx 1070 ti ? increase core? mem ?

Hi,

the error 702 indicates a cuda-timeout. It takes too long until the kernel finishes and the driver terminates it. Please try to use intensities/grid sizes below 10240. For MTP I would start without any OC. Please try to get a stable configuration first.

You can make you command line somewhat simpler - so TT will find the best CUDA version for your installed driver/interface:
-A MTP -P abcdefghasjdhaklsdjallkajdl.worker:x@zcoin-eu.mintpond.com:3000 --api-bind 127.0.0.1:4033

RAM and Virtual RAM looks OK - Celeron is fine as well.

I would guess you have a OC problem with GPU 0 and maybe GPU 1 - they show rejected shares (but I'm only guessing!).

Please let me know if removing OC helps?

thank you for reply TrailingStop

I tried different configs, memory +200 core +200, also tried MTP-100 and MTP-101

also tried -i auto 1024 10240 256
it finds best grid etc but still randomly crashing.

was using other miner before with +200/+200 and had no issues..

those rejected shares appeared on any of cards randomly..

PS: using Awesome miner and it adds the "stratum+tcp://" by default, do you think that can be problem?
if its not that, what you mean by your suggested config, cant see any difference ?

Will try to remove all OC

stratum+tcp is no problem. My config is almost identical to your. Since I develop the miner on these cards I do not try to get the last hashrate out of the GPU. I use defaults for most settings and no OC so that I can be sure to see crashes because of bad development, not because of bad OC settings.

Do you also use MTP if you run your cards with +200/+200?

not sure what you think by last sentence sir.. I run it on +200/+200 and with MTP in config as posted above:

Code:

-A MTP-100 -P stratum+tcp://abcdefghasjdhaklsdjallkajdl.worker:x@zcoin-eu.mintpond.com:3000 --api-bind 127.0.0.1:4033