Re: [Guide] Dogie's Comprehensive ASICMiner Cube Setup
- Make sure your router's subnet is 1, ie 192.168.1.x
Hi all.
I can really use some help here:
I have this ASIC cube set up as per your instructions, and the darn thing will not hash above maybe 4gh/s unless I sit on the BE cubeminer screen and click on pools every few seconds (or when data stops streaming in)
This is my set up. I cannot use anything other than 0.0.0.0 as it's gateway as it is up on a business network)
..or am I doing something wrong.
Please help!
Take the port out of the IP, long pool should be active (which may be causing what you have).I can really use some help here:
I have this ASIC cube set up as per your instructions, and the darn thing will not hash above maybe 4gh/s unless I sit on the BE cubeminer screen and click on pools every few seconds (or when data stops streaming in)
This is my set up. I cannot use anything other than 0.0.0.0 as it's gateway as it is up on a business network)
..or am I doing something wrong.
Please help!
That's just it. Long pool sometimes is active and other times it isn't?
I'm stumped. Removal of the ports from the ip address did nothing. :/
Nope. Only two other pc's on wifi in our entire facility.
I can add mine to it if necessary (if it's to check something?)
lol. Cube's hashing at 2.5GH/s :/
Android wifi phones sometimes interfere. If all the chips are 0, try moving the cube/proxy in relation to each other. There may be a network switch or similar that isn't playing nice. Aka random network topology issues.
Check the network cable and the switch port it's plugged into.