Quote from: lupaarSen on June 11, 2019, 04:01:37 PM

Quote from: Rakly3 on June 11, 2019, 03:32:33 PM

Quote from: SamAlackass on June 11, 2019, 11:24:23 AM

Thank you for the link! I can't believe it never came up before.

My pleasure

Quote from: lupaarSen on June 11, 2019, 02:45:55 PM

I cant get more than 1950 H/s Pulse 56 Stock Bios Samsung memory /Lucky Timing from config file (56-Hynix) @ 1407/905 Mem:950 13*13:AAA
That suck really.... ideas?

Before 0.5.0 = 2100H/S

Man... you all use so much power on your vegas.
I have 1950h/s - 1990h/s with both the core and mem at 880mV (stock timings still, I don't have them that long yet. Still learning Vega

))
The core powerdraw is avg 117W, with dips to 95W and spikes to 130W (Eth & CNr)
The mem i can't get an accurate reading, not even with HWinfo. It is stuck at 1.2V without budging once, but changing the mV does have impact on stability and hashrate, so I'm sure it's not 1.2V)

I ran several autotunes and used those configs
ilovetrm

As a sidenote. the list devices batfile recognizes all my 4x0 and 5x0 as 580's.
Dunno if that's normal?
And with autotune, my 4gb cards are faster than my 8gb cards.
It's a mishmash of brands and memory brands tho.(no vega's in these rigs just fyi) (the MSI armor 470 8Gb Micron is just abysmal. Barely breaking 700h/s)

https://ibb.co/vc2qXPj

Not changing the fact i get bewteen 100-200H/s more...

Muuum i'm thinking that i didn't use timings before and 56 pulse is a nano PCB; do you think timings can screw up all of this? i'm using newly Minerstat OS exp. (18.04-19.10) flashing the stable version now...if it's not good ill back to *+* with stock timings and report here...antoher question i set up my mem voltage to 875-900-950 for a mem clock of 950 any advise?