Quote from: chertoyanov on June 25, 2019, 08:38:32 AM

Quote from: efudd on June 24, 2019, 10:08:12 AM

Quote from: chertoyanov on June 24, 2019, 08:37:06 AM

Quote from: ValeriB on June 24, 2019, 06:45:56 AM

Hello. Read the whole topic. My Z9 also works for many hours on the developer firmware. And it happens mostly at night, when I can not control it. My Z9 works on Flypool. But many people have different pools and everywhere the same problem. This problem is not in the pool and not in the miners, this problem is in the wonderful firmware !!! As soon as I reflashed my z9 on Antminer-Z9-DEFAULT-500-DUAL-MODE-201808280957-unlocked.tar everything worked just perfect! The hashrate curve on the pool has turned into a straight line at the level of 60 K/sol. Good luck to all.

The same for me. I am trying many setting, but the result is the as described above. Restarting the device is the only way to restore its normal operation. Below is the graph of the work of the rig, composed of two Z9 and one Z9 mini. The Z9 working with your firmware, and Z9mini is witn stock firmware. The problem appears incidently in about 24 or 36 hours. The problem occurs regardless of the pool used.
Devices shows that they are working at maximum speed, but the pool shows that they either operate at a slower speed or that there are no shares at all.

Helllo first post! Send your support ID from the status page. Your wording is very similar to the last person. Curious as heck!

I welcome you to use another firmware until you can actually provide the supportID and we can work through your logs.

EVERY one of those types of things that has come up has had an explanation and a resolution. Almost EVERY time it is externally caused.

If you are trying multiple settings, each time a setting is tried, cgminer restarts... it sure would not leave a single multi-hour gap that shows 0 hash rate. Wait... you said one was on stock and that graph was combined. So which is it?

What version of my firmware are you using?

The Z9 firmware has been installed and running a long darned time at customer sites and large installations. My oldest users are at almost 9 months with no problems.

If you are in Russia, this will not work with Roskomnadzor and I encourage you to use something else.

Vladivostok - api.fudd.net Not Working in Russia.

-j

Hello! I'm from Bulgaria. To be honest, there was no problem your ROM ath the begining. Problems started after 2 or 3 weeks. When this happened, I first switched to Luxor. There was no change. Then I tried with addinf stratum string in pool settings. There was no change again.
Yesterday I installed a different ROM and these problems were not repeated so far. So at this point I can not give my supportID, I can now re-install your ROM to track the problem together. I am very pleased with the possibilities of your ROM, so I would be happy to help if there really is a problem. The version I used was 2.3 for Z9.
Best Regards, Stefan

hello, i have monitored last 2 days my all farm with z9 mini and z11, there is problem on firmware or luxor pool i dont know really ,but miners time by time restarts or lost shares, very similar to last 10-20 posts including my other posts here, additional stratum string in settings not really make changes as after 12-20 hours problem repeats again, my some id you already have, i think its somewhere bug in firmware,now switch to another pool for 24-48 hours to see if problem is same as saw on luxor,p.s. i use paid/licensed versions on all miners so dev fee must be disabled at all