Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.9.2 - native algo switching
by
404_not_found
on 22/07/2019, 20:30:07 UTC
Quote from: doktor83 on July 22, 2019, 12:33:54 PM
Quote from: 404_not_found on July 21, 2019, 07:50:03 PM
Quote from: doktor83 on July 21, 2019, 02:34:41 PM
Quote from: just4u on July 21, 2019, 01:13:15 PM
I never really thought about flashing these cards (had them over a year now..) reports were it was "iffy" on Asus Strix cards that don't use Samsung mem.   I tend to switch between Xmrig, Stak, SRB, if mining xmr.. plus dok has low fees and works on his a lot.

Hi, with SRB your best drivers would be 18.6.1 with CN/R, because on every new block from the pool, the kernel is recompiled and my tests show that 18.6.1 compiles the best code still.
I know there are users here who have Hynix mem Vegas and were able to get nice results, maybe they can help you out. I have only 1 Vega56 with Hynix mem but it is a really good piece, it goes on profile 10 without problems and 2100+ hash.

112/16/2 are the best settings you can get for CN/R. Maybe try out the low profiles (add L after the profile number)
If using config file, you must surround the value with quotation marks if you want to use the L profile. Example : "5L"

Thanks for the kind words, and for using SRB. Smiley


Dok, what are your profile settings in ODT allowing for 2100+ using profile 10? Can barely push 2000+ on profile 7 – "8L" is a no-go. Much appreciated.

I guess its more about the asic quality and cooling, than settings.
ODT is nothing special : 1450/940 900mV


For sure. And yeah, ODT nearly identical. Figured to cross-reference with your settings. Cheers.