Quote from: DaveF on August 11, 2019, 04:07:41 PM

Did some testing:
If I pull the wan port cable from the router and plug it back in ~ 5 minutes later it's fine.
If I pull the wan port cable from the router and plug it back in ~ 30 minutes later it stops updating and never comes back.
If I pull the power from the router and wait a minute and plug it back it in may or may not start updating.
If I pull the power from the router and wait a good long time (20+ minutes)and plug it back in it seems to start updating.

Did not do "extensive" testing just 2 or 3 tests for each due to the time involved in some of the testing.

-Dave

Thank you for testing this.

I have implemented the battery and there is only a few issues to solve and testing before the new device becomes available.
Along with the battery comes a major firmware update that incorporates a Status bar that provides more information of the device connectivity.
The connectivity is handled slightly differently with the new firmware but i'll make sure to test router outages in order to ensure that if something happens at least the user is informed.

One thing to note is that due to the battery requirements unfortunately the main board and the case need to be upgraded.
Maybe i'll come up with a retrofit package only available for legacy devices.