Quote from: roslinpl on February 18, 2014, 11:37:24 AM

Quote from: moccor on February 18, 2014, 11:28:14 AM

Quote from: MrCallahan on February 17, 2014, 11:20:54 PM

Quote from: roslinpl on February 17, 2014, 10:44:30 PM

I am still suffering desynchronization

qt 1.0.0.1

devs, can you help?

My conf file is named correctly.
flappycoin.conf

now it contains:

Code:

rpcuser=flappy
rpcpassword=mario
daemon=1
server=1
listen=1
rpcport=11555

addnode=173.58.8.110:11556
addnode=101.167.59.225:11556
addnode=86.130.80.214:11556
addnode=99.241.74.216:11556
addnode=151.230.16.60:11556
addnode=98.196.133.57:11556
addnode=5.175.193.221:11556
addnode=87.224.151.220:11556
addnode=113.248.80.57:60784
addnode=203.174.12.17:58713
addnode=101.226.247.43:23943
addnode=62.163.9.155:61354
addnode=119.125.74.62:11556
addnode=162.243.219.6:35963
addnode=209.193.47.249:63062
addnode=205.204.50.88:58740
addnode=78.90.137.167:11556
addnode=173.51.180.254:11556
addnode=81.104.23.219:56855
addnode=83.128.154.201:32800
addnode=74.90.20.137:49909
addnode=83.252.155.158:65197
addnode=217.118.83.186:65269
addnode=108.180.101.26:56827
addnode=99.241.74.216:11556
addnode=71.72.189.203:37666
addnode=95.97.63.134:56647
addnode=115.91.171.92:60277
addnode=50.169.119.194:49559
addnode=50.161.77.201:55100
addnode=174.139.194.205:50331
addnode=146.48.87.114:63946
addnode=130.156.24.211:20069
addnode=94.123.196.157:62211
addnode=70.189.144.40:54638
addnode=78.242.242.22:57521
addnode=88.176.192.78:56344
addnode=82.236.129.31:49274
addnode=50.46.235.36:61906
addnode=221.204.172.65:49596
addnode=94.242.52.199:56582
addnode=24.86.109.154:11556
addnode=121.223.38.24:54350
addnode=58.169.177.19:49882
addnode=70.79.105.55:63422
addnode=75.32.234.140:13116
addnode=110.20.146.223:49458
addnode=65.30.25.96:55255
addnode=178.120.55.198:59821
addnode=70.52.93.180:63339
addnode=61.132.94.251:59336
addnode=173.58.8.110:64613
addnode=2.248.130.3:55877
addnode=106.116.205.80:49342
addnode=61.157.126.1:39139
addnode=124.121.62.223:10271
addnode=1.120.172.130:56303
addnode=184.32.101.153:58305
addnode=50.10.14.134:61177
addnode=173.58.138.157:59853
addnode=60.151.153.242:2926
addnode=71.199.112.21:49265
addnode=128.72.69.237:59086
addnode=58.170.165.44:63734
addnode=65.129.73.133:51476
addnode=50.31.240.238:49875
addnode=86.218.169.246:11556
addnode=99.188.168.230:32572
addnode=198.91.248.4:60567
addnode=50.100.147.117:63423
addnode=113.190.33.106:3190
addnode=129.7.134.228:39332
addnode=174.139.83.252:57023
addnode=86.24.143.245:50828
addnode=208.180.172.73:56638
addnode=67.160.69.168
addnode=67.172.183.106
addnode=72.24.25.36
addnode=54.244.115.206

I added nodes as Op say

(at the end we can see them)

When I typed them manually in debug - seems like qt saw it in conf file and say that already added.

firewall is not holding.
Even if I switch off AVG, nothing changes.

Sad

maybe can you share torrent to latest blockchain?

or something ...

I need it syncronized!

So want to use my Flappies

Not sure if you solved this yet, but it took me a while to get mine synced too. The big thing for me, was time! As long as you have the conf file, and your firewall is allowing it, it should work. Leave it open for an hour or so, and see if it eventually connects, it'll try each node multiple times until it does. I left mine open, and left my PC for a couple hours, came back to a fully synced wallet.

Left mine running over night 9and some hours before) with the edited config file to add all those nodes, still nothing here. Downloaded 1.0.0.2, still isn't updating, gonna leave it go while I am at work.

Same here.
Not synchronizing at all after 8 hours of qt running

Added : My flappy qt is working now ... It just start working. Just like that. I just run it and it starts synchronizing...
Strange for me as I am IT engineer

I hope this problem will never come back.

regards!

Yeah I finished school for computer networking. I even went as far as to use ccleaner to check the registry and delete any old cache that could be interfering. Still nothing. I guess I'll just let it keep doing its thing if yours randomly started working. Thanks for the info