Quote from: adaseb on September 15, 2019, 05:59:27 AM

Quote from: oskoa on September 14, 2019, 06:21:37 PM

Hey, ive a question.

I ve RX 570 (Ellesmere) and i use a little OC in memory (like 1600 to 2000). and i use this way always. Now reading the author's notes, i used the Driver install, Strap and RXBoost, and i can see a good changre (since 24 to 31 hasrate), and i dont see changes in the MSI Afterburner (same clock/mermory/tdp/temp that without these options). The question is, if my cards will be afected really with this options. Thanks.

If you have set the OC settings in the Claymore config file and you actually are getting 31 MH/s then you have done it correctly. Depending what AMD drivers you are running, you might get issues with MSI Afterburner. So if you want to verify your clocks you can try using the AMD Driver software called WattMan which is in the AMD display settings, or you can just use GPU-Z. Launch it and you will see your current clocks.

You should also undervolt if you haven't to save some watts and lower the temperature of your GPUs. You can also verify your hash speed in your pool after a few hours since the difference between 24 to 31 mh/s should be noticeable.

Hello and thanks. What i win exactly undervolting the Cards?