Quote from: Steamtyme on October 07, 2019, 12:43:28 AM

In short no. Most other countries I believe run 220/240 at the residential level, as opposed to bringing it down to 110/120. With fewer plug differences so that's why you find the Kill-a-watt style devices so readily available. What I did to allow for growth and density, was go with 30 amp 240V circuits to a PDU then to my miners. If you want to spend a lot of extra coin you can buy some pretty fancy PDU's but they're not necessary. That's very similar to what my first couple miners ran off, so there's nothing wrong with the circuit as is, for most miners. You can always upgrade down the road.

Here's another that can be helpful when starting out. First time/Small miner reference for getting started.

Thank you. I have 240V 30A breakers. 10/2 WG wire to a solo 20 amp plug for each miner (This is the actual plug I use.)

I have thought about wiring my receptacles with foreign receptacles and purchasing new cables just to get the meters. I'm still not swayed to do that and will continue to clamp around.