Quote from: klondike_bar on February 21, 2014, 05:35:29 AM

Quote from: ryliou on February 21, 2014, 05:09:46 AM

Quote from: pjviitas on February 21, 2014, 04:47:51 AM

Quote from: ryliou on February 21, 2014, 04:09:37 AM

----------------------------------------------------
Now my real Question.

1) My Internet Router is the default gateway 192.168.1.1, where all my PCs, Phones, TV set tops are connected to.

2) My New AntMiner has label said - 192.168.2.99, so how do I connect to it?
Do I need a 2nd router to do this?

3) If I don't need 2nd router, then if I can use the direct connection using network cable, one cable end to my PC, another end to AntMiner and both will be configured in 192.168.2.xx subnet?

Help and Thanks.

1.Unplug your laptop from your lan and change the ip settings to the same subnet as your miner.
-done
2.Plug your laptop into your miner
-done
3.Log into the miner and change the ip settings to the settings on your lan.
-My problem is at this step, media/cable unplugged and I can't ping or open miner login page.

4.plug your miner into your lan

5.change the settings on your laptop back to the subnet for your lan

6.plug your laptop back into your lan

7.log into the miner on your lan and finish the setup

I am at step 3 above, media/cable unplugged and can't connect/ping the miner.
What's next?

go to network adapters -> ethernet -> ipv4 properties -> set the laptop ip as 192.168.2.201 and gateway as 192.168.2.1 connect the laptop and miner directly with a single ethernet cord. go to 192.168.2.99 in browser and then change the antminer settings

remember that you may need to restart your network service to make the changes take effect...in windows this might entail a reboot