Quote from: captain-v on February 23, 2014, 04:16:43 AM

Quote from: Powell on February 21, 2014, 10:53:37 PM

Got my second October 4VRM Jupiter in and on first bootup worked fine for a few hours. I updated to 1.0 to test and I noticed when I turned off SPI Auto this:

I've tried the hit it with SPI 3.3 and max voltage. Let it run a few hours like that. I have had them drop when OC to high but this I can't seem to rescue.

There is it at max voltage on that one. I've swapped back to .99.1 , .99.2 and 1.0 and can't seem to get it to jump back up.

I've tried running 231 and 221 but sadly nothing helped kick that one up even. Sad

Any other suggestions so I can put this Jupiter to a happy # Wink

I've been having the same problem until today on my O S+1. Now SPI @3.3V and die1 with -0.0806V and 675MHz made it work. I was getting higher rates with 231 around 450GH/s. Now with all other dies @775MHz total close to 425GH/s with less errors.... Also with all other dies at -0.1465V, power dropped from 560W (w/ Stock values) to 460W at the wall.

Is there a way to 231 the other ASICs and leave this slepy die1 on ASIC alone @675MHz?

yes read the thread and find the msg where it talks about making every die different oc