Quote from: palawan on February 23, 2014, 02:59:39 AM

Quote from: ryliou on February 23, 2014, 01:55:02 AM

Quote from: palawan on February 22, 2014, 08:56:42 PM

Quote from: ryliou on February 22, 2014, 07:37:00 PM

Quote from: ryliou on February 22, 2014, 05:23:50 AM

Quote from: Brassguy on February 22, 2014, 01:51:29 AM

...

...

Hit a roadblock, I am using Verizon FIOS internet, the router use a static IP 192.168.1.1 with subnet 255.255.255.0.
There's no way of changing router IP, nor can I change subnet to 255.255.254.0 to cover 192.168.2.xx.

Look like the new batch S1 of IP 192.168.2.99 caused Verizon FIOS customer a lots of troubles.
Router from my last Cable Company is easier to change. All with older batch S1 on 192.168.1.xx is luckier.

Direct cable connection can only works for 192.168.1.xx ONLY?

What's now, buy a new router to add 192.168.2.1 network?

I don't want to intrude in the middle, but if you want to try the steps below:

1. Connect the Antminer to your router/switch via cable
2. On a computer (laptop/PC) that is connected to the same router/switch (via cable or wifi), change the IP address of the computer to 192.168.2.55 subnet mask 255.255.255.0 gateway doesn't matter
3. Connect to the Antminer web url 192.168.2.99 and make changes
4. Change Antminer to 192.168.1.188 mask 255.255.255.0, gateway 192.168.1.1, custom dns 8.8.8.8
5. Make sure you save and apply above and wait for it to finish, sometimes needs reboot after
6. Put the computer on step 2 to normal settings (probably automatic DHCP)
7. Access Antminer web url 192.168.1.188 and set pool info

I configured both of my Antminer S1's from factory via wifi on my laptop (dell mini 9 netbook). I've never directly connected to either of my Antminer to a laptop/computer.

Good luck.

Could anyone/two of you do me a favor? Take screen shot of your ipconfig output.
mine have both 192.168.2.xx by cable and 192.168.1.xx by wireless, but still can't access Miner.
The network cable head green light is not even on for Miner, the rest of PC/Laptop are all on.

I probably need to ask seller for a replacement network/control card.

Quote from: ryliou on February 23, 2014, 01:55:02 AM

Quote from: palawan on February 22, 2014, 08:56:42 PM

Quote from: ryliou on February 22, 2014, 07:37:00 PM

Quote from: ryliou on February 22, 2014, 05:23:50 AM

Quote from: Brassguy on February 22, 2014, 01:51:29 AM

...

...

Hit a roadblock, I am using Verizon FIOS internet, the router use a static IP 192.168.1.1 with subnet 255.255.255.0.
There's no way of changing router IP, nor can I change subnet to 255.255.254.0 to cover 192.168.2.xx.

Look like the new batch S1 of IP 192.168.2.99 caused Verizon FIOS customer a lots of troubles.
Router from my last Cable Company is easier to change. All with older batch S1 on 192.168.1.xx is luckier.

Direct cable connection can only works for 192.168.1.xx ONLY?

What's now, buy a new router to add 192.168.2.1 network?

I don't want to intrude in the middle, but if you want to try the steps below:

1. Connect the Antminer to your router/switch via cable
2. On a computer (laptop/PC) that is connected to the same router/switch (via cable or wifi), change the IP address of the computer to 192.168.2.55 subnet mask 255.255.255.0 gateway doesn't matter
3. Connect to the Antminer web url 192.168.2.99 and make changes
4. Change Antminer to 192.168.1.188 mask 255.255.255.0, gateway 192.168.1.1, custom dns 8.8.8.8
5. Make sure you save and apply above and wait for it to finish, sometimes needs reboot after
6. Put the computer on step 2 to normal settings (probably automatic DHCP)
7. Access Antminer web url 192.168.1.188 and set pool info

I configured both of my Antminer S1's from factory via wifi on my laptop (dell mini 9 netbook). I've never directly connected to either of my Antminer to a laptop/computer.

Good luck.

Could anyone/two of you do me a favor? Take screen shot of your ipconfig output.
mine have both 192.168.2.xx by cable and 192.168.1.xx by wireless, but still can't access Miner.
The network cable head green light is not even on for Miner, the rest of PC/Laptop are all on.

I probably need to ask seller for a replacement network/control card.

I'm not running Windows. I run Arch Linux and Linux Mint on my laptops. And all devices on my network are 192.168.55.x subnet now. That includes the miners, 3 laptops, cell phones, tablets, chromecast.

At any rate, that's a problem if there's no link light on the Antminer S1. First thing's first, you need physical connectivity before you can access the miner.

Did you connect the Antminer to your router and you're not getting a link light on the Antminer? and you're sure the cable is good?

I had a similar experience and had a moment of WTF. I just kept trying different cables until I found one that worked. It seems the female ethernet connector on the ant's do not mate up well with some connector/shield combinations on some cables.