Quote from: mononova on December 26, 2019, 05:14:06 PM

Keine eine Idee?? Huh

Claymore hat in seinem Thread und in der Readme- Datei im Ordner des Miner alles recht ausführlich dokumentiert.
Dort findest du auch immer sämtliche Befehle.

Quote

-rxboost enables additional boost for AMD Polaris cards and old AMD cards (Hawaii, Tonga, Tahiti, Pitcairn). This option is available for Windows only. It mproves hashrate up to 5% by applying some additional memory settings.
To enable it, use "-rxboost 1", you can use your own straps or use "-strap" option, you will get boost anyway. If your card is unstable, you can specify custome boost value (2..100), for example, "-rxboost 5".
You can also specify values for every card, for example "-rxboost 1,0,10,30".
Default value is "0" which means no boost at all.

Quote

-strap   applies specified memory timings (strap). This option is available for Windows only and requires AMD blockchain drivers or drivers 18.x or newer (most tests were performed on 19.4.3) for AMD cards, any recent Nvidia drivers for Nvidia cards.
   Currently Polaris, Vega and Nvidia 10xx cards are supported, support for other cards will be added later.
   Miner has built-in straps database, all straps are separated by memory (4GB or 8GB) and memory type (Samsung, Elpida, Hynix, Micron).
   Straps are sorted by intensity, i.e. "-strap 1" supports higher memory clock than "-strap 2", etc. For the best hashrate you must also set high memory clock, so "-strap 1" is a good start point for tests.
   You can specify just strap index, for example "-strap 1" will apply first strap from database for all Polaris GPUs based on GPU memory size and memory type, miner will show full strap name detected.

Häng mal

Code:

-strap 1 -rxboost 1

an dein .bat File
und sag Bescheid was sich getan hat.

sollten dann eigentlich 1-2 MH/s mehr sein je Karte.

Für -strap 1 solltest du den mem clock schön raufdrehen.