Quote from: richmke on February 26, 2014, 06:33:13 AM

Quote from: teekan on February 26, 2014, 03:33:12 AM

I looked in the dhcp table and have use router as dhcp server checked and only have a starting and ending IP address from 192.168.1.2 to 192.168.1.254 is the only addresses are in there right now.

Narrow the range from .2 to .10 (not .254). power cycle the controller. Then check all addresses from .2 to .10.

Thanks for the tip btw. I finally solved the issue though! The cause was a old arse version of router firmware. After I upgraded the firmware, it had a whole option for attached devices and I seen the right IP and could log on fine from there!

Now on to the next question!

Those of you who have the "GOLD" edition Lightning Asic's (i'm sure that's what most of us all got) how did you go about updating the firmware on these? I seen on the tutorial there is a white switch but there isn't one on the "gold" edition ones. I seen the "update firmware" on the dashboard and clicked it and seen you can upload a file, so I went and grabbed the Uart_miner_FW_Ver01140116_20140116.bin file that was included in the Firmware upgrade guide and hit upload but I got an error saying it was invalid.

Can anyone please explain how to upgrade the miner firmware if you can on the "GOLD" edition LA3M's? I saw in the thread that we are supposed to get some new firmware soon, but not sure if that is for the miner or controller.