Quote from: Binary100100 on February 22, 2020, 03:30:43 PM

Quote from: Trehjulingsleffe on February 21, 2020, 07:41:31 AM

My RX5700 XT red devil works for a couple of hours and then hangs, miner restarts but for some reason hash 0.0mhs after that forever even though wd is enabled (standard).

The computer needs to restart in order to make the mining work again for a random number of hours.

This started to occur 3 days ago. Before that I could mine with weeks of uptime without issues.
I've tried DDU and many different and drivers.

Have any of you problems now with rx5700 XT?

What overclock settings are you using?
I'm using this in my command line and it's rock solid. Averaging ~52mh/s at ~85W for each 5700 XT.

-mi 14 -wdog 1 -cclock 1175 -cvddc 715 -mclock 1800 -tstop 75 -tstart 60 -hstats 2 -tt -36 -mt 2

Not sure if it matters but I'm using the original XFX reference models.

I was using this to get 54mhs at 115w:
-cclock 1260
-mclock 1860
-cvddc 687
-mvddc 687 (this hasn't any effect on RX5700 XT)
-mi 12
-gt 22

That works stable now. I'm using MorePowerTools to get to this low voltage.

I tried your settings because you got incredible low wattage but i ended up with 108w and 49,7MH/s.

-mi 14
-wdog 1
-cclock 1175
-cvddc 715
-mclock 1800
-tstop 75
-tstart 60
-hstats 2
-tt 36
-mt 2

Got it stable wich is most important. All wattage is meaterd in Phoenix Miner software. Not from wall.

How are you guys able to reach to low power consumtion?