Quote from: Biffa on February 22, 2020, 05:02:08 PM

Its probably using the other miner application to mine its 2.8% fee.

No. Bitmain has both of them installed and running from the factory. Dev fee doesn't do anything with running a separate miner and that would just cause issues as they both can't send work to hashboards at the same time.

Quote from: thierry4wd on February 23, 2020, 10:07:23 AM

i have one T17, and contain CGMINER + BMMINER to ! original firmware, i have examined this, and, CGMINER is used only for running hashing, and BMMINER is user for booting / rebooting or apply config...

So, no problem, just stipide bitmain, mixed two version... if you delete only BMMINER, miner run good, but you don't want apply new config (pool for exemple) ... the code is mixed ...

It does more than that. Bitmain did some wonky stuff on this machine.

Quote from: kano on February 24, 2020, 03:36:24 AM

You do get that bmminer is cgminer right?
BM just changed the name.

Why would bitmain be running two copies of cgminer then?

Quote from: wolfen on February 25, 2020, 03:26:28 PM

New firmware working great. Have a s17 53th running on a 62th profile. Just selected the 62th profile, let it autotune and now it runs great at 62th.
Chips cool, highest 75C

You can potentially go higher if you like. Target chip temp defaults to 75C so it trys to keep fan power draw low. It makes enough airflow to hold 75C I bet fans are not maxing out. But 62th is a very safe overclock.