Quote from: brainless on April 05, 2020, 01:41:14 PM

Quote from: alek76 on April 05, 2020, 01:30:45 PM

Quote from: brainless on April 05, 2020, 01:05:49 PM

Quote from: alek76 on April 05, 2020, 11:39:35 AM

Quote from: Firebox on April 05, 2020, 11:23:27 AM

Unfortunatelly I'm not really expert in this. I'm using 'Visual Studio 2019'.
I have finally succeded to comply vs-kangaroo-hybrid.exe by choosing 'Release' in configuration (before was 'Debug' by default), but without any aadditional settings. Just as it was.
Where do I put this settings "make gpu=1 ccap=20 all"?
Another question here. Runnigng test and found that script goes over 100% i.e. for #50:

Compute capability 2.0 and 3.0 Not supported.
This is normal, the program does not make accurate calculations. Set -p 0 or for bits 50 use cpu version.

Feedback
if run for bit 65
Comparator time: 0.206 msec wild.txt 0 bytes tame.txt 0 bytes
[/][ 0: 0: 6 ; 4.4M j/s; [GPU 4.43 Mj/s] 26.0Mj 0.2%; dp/kgr=0.0; 0:32:11 ]

upword any bit like bit 75 screen is
Comparator time: 0.195 msec wild.txt 0 bytes tame.txt 0 bytes
[\][ 0: 0: 2 ; 0.0 j/s; [GPU 0.00 Mj/s] 0.0 j 0.0%; dp/kgr=0.0; 8.0Ky 4m 17d 6: 9: 4 ]

Which video card do you use? What options does the program run with?

gtx 460 and gtx 750

gtx 460 not supported. for gtx 750 command : make gpu=1 ccap=50 all