Quote from: jacktman on Today at 12:26:05 AM

Hello greetings to all, currently my T17 after 5 months running smoothly has started to give me some problems;

Code:

2020-04-25 22:20:38 driver-btm-api.c:1443:dhash_chip_send_job: Verion num 4
2020-04-25 22:25:37 thread.c:384:is_zero_nonce_happened: chain_nonce[0] = 15645
2020-04-25 22:25:37 thread.c:384:is_zero_nonce_happened: chain_nonce[1] = 15748
2020-04-25 22:25:37 thread.c:384:is_zero_nonce_happened: chain_nonce[2] = 15840
2020-04-25 22:39:39 register.c:290:get_register: !!! REG_TYPE = 1. 939572226
2020-04-25 22:40:00 temperature.c:683:get_temp_info: read temp sensor failed: chain = 0, chip = 64, reg = 1
2020-04-25 22:40:19 temperature.c:683:get_temp_info: read temp sensor failed: chain = 0, chip = 48, reg = 1
2020-04-25 22:40:39 temperature.c:683:get_temp_info: read temp sensor failed: chain = 0, chip = 168, reg = 1
2020-04-25 22:40:59 temperature.c:683:get_temp_info: read temp sensor failed: chain = 0, chip = 184, reg = 1

and stop mining, this occurs between 12 noon and 6 or 7 p.m.,then it seems to work normally, the ambient temperature is about 31°c to 34°c
I'm not sure if it's a room temperature problem or a temperature sensor problem.
looking for some information I found your firmware, I have some questions;

1) Does your firmware solve this problem?
2) i have developed a script to keep control and check all my miners (hashrate, temperature, fans, ASIC status, etc) it shows the status of all the miners on one screen, it sends me email alerts if something is below the set values, i use socket connections and get the "json" response, with your firmware can i keep asking the miner for this information and get the same response by json?

here you can see a screenshot of my script: https://imgur.com/a/j5uKQOr

thanks.

That is a pretty hot room in general.... BUT

Temp sensors are STUPID FUCKING COMMON PROBLEM. Honestly it's more so your temp sensor shit the bed. Rebooting it might get it working or flashing the recovery firmware then flashing back.

you can call the bmminer-api stats to get the info. I am not sure if there is a webhook for it I will check