Quote from: gt_addict on June 02, 2020, 01:19:45 AM

You want to be careful you dont pop your usb hub when OCing. Im running mine 6x newpacs at 625m on the gekko hub and wouldn't go any higher as I could well cause some damage (and thats after sidehack tried to make it as bulletproof as possible). No idea how that anker 60w is laid out. Just something to keep in mind Wink

Yeah that's my biggest concern and the main reason I haven't tested anything above 500 yet. I'm definitely picking up a gekko hub asap the layout, the fan header, the juice. I need one haha. What kind of GH/s do you achieve at 625mhz?

This anker's specs are meh:

Quote

■ Each data port provides up to 0.9A current.
■ The 10th port delivers a full speed charge of up to 1.5A to BC 1.2 specification-compliant devices. Refer to the table below for popular compatible models.

A BC (Battery Charging) 1.2 port delivers fast charge (up to 1.5A) to your USB-enabled device. Charge speeds are even faster (up to 2.0A) when the hub is disconnected from a computer.

Not sure if the 10th port also transfers data, but if it does its the only port on the whole that delivers above .9A. Ill test it later, from reading I believe i'm not actually supposed to be powering the Pi from the charge port, that's a bummer. (Hub must be powered by both a power adapter and an active PC/laptop USB port.) Makes it sound like it gets extra juice from the usb port as well.

Do these units operate on 5.5 or 12v?