Quote from: PhoenixMiner on July 14, 2020, 11:33:29 AM

Quote from: Branko on July 13, 2020, 08:51:53 PM

Crazy stuff, my single RX580 get recognized as two RX580 GPUs. and mining at 12MH/s each,
while fan stays at 0 rpm, until it crashes due to overheating

Does anyone have latest AMD driver and latest 2004 windows 10 version, and its working well?

Probably a driver issue with two OpenCL drivers each reporting the same GPU. We had somewhat similar issue with DDU not removing the drivers completely - to be sure, please check if all Radeon GPUs are missing from the Device Manager after DDU finishes and restarts the PC (and before installing the new drivers) - you should see only the iGPU and generic "Microsoft Display Adapter" GPUs there. If there is a Radeon GPU still recognized, DDU must be started again to finish the job before installing the new drivers.

On a related note, you will need PhoenixMiner 5.1b for the latest AMD drivers 20.7.1 to work properly.

Quote from: shimmishim on July 13, 2020, 05:21:28 PM

I'm getting a strange occurrence. It took me a while to troubleshoot and I just can't seem to figure out what's wrong. After a random amount of time (anywhere between 5 minutes to almost 2 hours), the miner will "pause" and indicates to press any key to continue at which point it just shuts off. There's no error message. It just says "pause Press any key to continue..." Does anyone know what might cause this? Thanks!

Check if something emulates pressing 'p' in the console window (it may be some process that "feeds" text data to the standard input of PhoenixMiner and if 'p' occurs there, the miner will be paused).

I suspect something like that to be the problem, however nothing helped, tried to deinstall drivers in lots of ways. Guess complete
windows reinstall is needed