Quote from: UnclWish on Today at 09:58:44 PM

Quote from: luigbren on Today at 09:41:08 PM

Hello, thanks for answering, which configuration and drivers do you recommend to install? I use Etherminer pool, I have the last PMiner, i installed the 20.4.2 drivers but it does not work well either, the first continuous in 0mhs, and by the way I am underperforming. at 11mhs

Code:

No CUDA driver found
OpenCL driver version: 20.4.1-2
Available GPUs for mining:
GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU2: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU3: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU4: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU5: Radeon RX 570 Series (pcie 8), OpenCL 2.0, 4 GB VRAM, 32 CUs

Eth speed: 46.361 MH/s, shares: 1/0/0, time: 0:01
GPUs: 1: 0.000 MH/s (0) 2: 11.588 MH/s (0) 3: 11.599 MH/s (0) 4: 11.620 MH/s (0) 5: 11.554 MH/s (1)
GPU1: 33C 85% 5W, GPU2: 46C 85% 88W, GPU3: 45C 85% 90W, GPU4: 45C 85% 88W, GPU5: 44C 85% 89W
GPUs power: 359.4 W

Drivers 20.4.2 is normal. You can use them. Did you changed GPU's workflow to "compute" in Radeon Settings? You can press "Y" during PM mining to change GPU's workflow to "compute".
What command line you're using? What command line you used for CM? PM supports most of CM options. Press "Z" key after launching for autotune the -gt parameter. It use about 5-10 minutes.
Did you set enough pagefile size?
Monitor connected to your 1st GPU?

Hello my friend, I already installed another driver, I also switched to computer mode using the AMD-Compute-Switcher tool and continues without booting the GPU1, mostly it stays at 0.00mhs or 1mhs, I don't know what else to try..

The command that I used in CM is the following:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xXXXXXXXXXX.Mrigp -epsw x -dbg -1 -wd 0 -mport -3000 -strap 1 -rxboost 1

The command that I used in PM is the following:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool us1.ethermine.org:4444 -wal 0xXXXXXXXXXXXXXX.Mrigp -mport -3000 -rvram -1 -amd -wdog 0 -log 0
pause

my log:

Code:

Phoenix Miner 5.1b Windows/msvc - Release build
-----------------------------------------------

OpenCL driver version: 19.7.3-5
Available GPUs for mining:
GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU2: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU3: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU4: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 4 GB VRAM, 32 CUs
GPU5: Radeon RX 570 Series (pcie 8), OpenCL 2.0, 4 GB VRAM, 32 CUs
Eth: Loading pools from epools.txt
Eth: the pool list contains 6 pools (1 from command-line)
Eth: primary pool: us1.ethermine.org:4444
Starting GPU mining
GPU1: AMD driver 19.7.5
GPU2: AMD driver 19.7.5
GPU3: AMD driver 19.7.5
GPU4: AMD driver 19.7.5
GPU5: AMD driver 19.7.5

GPU1: Generating ethash light cache for epoch #349
GPU2: Free VRAM: 3.948 GB; used: 0.052 GB
GPU2: Allocating DAG for epoch #349 (3.73) GB
GPU2: Generating DAG for epoch #349
GPU3: Free VRAM: 3.948 GB; used: 0.052 GB
GPU3: Allocating DAG for epoch #349 (3.73) GB
GPU3: Generating DAG for epoch #349
GPU4: Free VRAM: 3.948 GB; used: 0.052 GB
GPU4: Allocating DAG for epoch #349 (3.73) GB
GPU4: Generating DAG for epoch #349
GPU5: Free VRAM: 3.948 GB; used: 0.052 GB
GPU5: Allocating DAG for epoch #349 (3.73) GB
GPU5: Generating DAG for epoch #349
Eth: New job #c9ea70b2 from us1.ethermine.org:4444; diff: 4000MH
GPU1: Free VRAM: 3.948 GB; used: 0.052 GB
GPU1: Allocating DAG for epoch #349 (3.73) GB
GPU1: Generating DAG for epoch #349

GPUs: 1: 1.332 MH/s (0) 2: 24.869 MH/s (0) 3: 24.567 MH/s (0) 4: 23.334 MH/s (0) 5: 23.525 MH/s (0)
Eth: New job #38f6c487 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #df9ad754 from us1.ethermine.org:4444; diff: 4000MH

*** 0:00 *** 7/16 18:31 **************************************
Eth: Mining ETH on us1.ethermine.org:4444 for 0:00
5 GPU(s) are auto-tuning. Hashrate may be low until they are ready.
Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
Eth: Average speed (5 min): 0.000 MH/s