Quote from: Austpool on Today at 05:21:05 AM

Hey everyone.

I am having an issue with GPU clocking.

I have 3 6gb cards and 1 mining 3gb card in one machine. (not ideal, but it is what it is for now.)
my problem is with clocking the GPU's differently.

i have the 3 6gb gpu's as one miner and the 3gb as another. i have the miner set to only use those gpus for that miner.
however, when one of the miners need to change clocking for the algo, it changes it on all gpus. even the gpu that's not set to be controlled by that miner.

is there something i'm missing?

i can set them manually and they mine and work fine. but when the 6gb gpus mine ETH, and the memclock is increased, so is the 3gb gpu that can't and isn't able to mine eth.. even though it's not added to that miner.

i have the 3gb gpu on a seperate profit profile too.

thanks for any help.

Try this:
Go to the "Options" and then "GPU Clocking Profiles".
1) Create Clocking Profiles for your cards. For example 1 profile for the 6GB and 1 profile for the 3GB. If you need more profiles, because of much different settings, just do it.
2) Now create a Clocking Profile Group. On the right side under "Properties" select your Clocking Profile from 1). Then select the matching rule, best here is the "GPU ID" or even better the "GPU PCI Bus ID". The ID's you can get inside the GPU-Tab at the bottom of AM. Add as many profiles to that Group as you need.
Now you have the choice. If you want that profile loaded whenever that group starts, right click, select "Properties", select "GPU Clocking Profiles" and select your Group-Profile from 1).
If you want to start or stop that profile on different miners, like start when you mine ETH, but dont start when you mine another coin, than right click, select "Edit Profit Profile", click your algorithm and edit the "GPU Clocking Profile" section below with your Group-Profile from 1).

Repeat 2) for your second group of cards, and so on.