Quote from: batsonxl on October 17, 2020, 10:00:24 PM

Quote from: phucktum on October 17, 2020, 03:49:54 AM

Quote from: batsonxl on October 15, 2020, 07:28:02 PM

please miner freinds help to set up my rig. im new in phoenix miner. my cards running slow especially rx570 giving 26mhs. it was giving 30mhs on claymore. here is bat file, what can i add and remove.
Thank you everybody.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E -pass x -proto 4 -stales 0 -cclock 1170 -cvddc 920 -mclock 2070,2070,2010,2070,2070,2070,2070 -mvddc 920 -mt 1 -mi 11

1) You should download the soft amdmemtweak(cli version). Put soft to the same miner folder and right-click at the application->properties->compatibility->click run as administrator.
2) put the command: "amdmemtweak.exe -i 0,1,2,3,4,5,6 -ref 30" under the command "setx GPU_SINGLE_ALLOC_PERCENT 100"
3) Otherwise you should lower cclock to 1140/1150 (for 570.8gb) or 1100 (for 4gb cards); cvddc lower to 830-875; mclock to 2025; mvddc to 810-830.

Hope you have desirable hashrate with low power.

Thanks for help
All cards are 8g. REF 30 only giving 480 30.5Mhs and 570 giving 26.5Mhs, it is too low compared to claymore. if i go below 920volts my cards crashes or i get alot incorrect shares. 2060-2070 memory i best i can get till now. How people get 800mv and run these cards? there must be something i missed, Claymore not working anymore and no updates from him. Phoenix how i can get good results? How? AMD mem tweak does the job if you play with timings but im not expert in timings, how to set timing on AMD mem tweak? i tried get straps from claymore and i got them. but as soon as i apply it rig crashes restart. Sad

Uh. If all your cards are 8gb, you can use Claymore with newer or newest or even blockchain beta amd driver. Put the command -strap 1 and -rxboost 1 to your config file. Claymore will auto-finding the best suitable timing strap for each card on-the-fly. And this time you can try lower cclock,cvddc,mvddc to achieve lowest power.