Quote from: Sukarti on March 07, 2014, 04:10:03 AM

Quote from: bit_coin_genuis on March 07, 2014, 04:03:23 AM

Quote from: Sukarti on March 07, 2014, 12:06:23 AM

Try Intensity 19, if that works you may need to "re-tune" your cards to keep them at I 20.

Thanks I will give that a try... I have 4 different miners... this is the only one that does this.. although others have also been very unstable latetly, Crashing the Scrypt jane miner and requiring a re-boot very frequently !

I had been experimenting with my tuning during and found that I could clock down the memory to 800MHZ from 1500 without a decrease in performance just an FYI for everyone out there ! Also powertune does not increase performance from 0 to +20 does not increase hashing performance.

Cheers,

I have noticed some oddities with tuning on the latest N-Factor as well.

Make sure you're submitting sufficient shares and getting proper WU still. Don't just assume a certain kh/s means everything is good Wink

If the miners are windows based make sure and try CGWatcher, lots of nice features to keep your miners hashing 24x7.

Hi,

I have used CG watched since Day 1. But when miner starts crashing simple mining restarts are not enough. When they restart they hash at very low rates ( i.e. 14 kh/s) and sometimes it just says 0.00kh/s.... sometimes it crahses the computer. Its quite annoying.

I know there is an option to restart the computer in CGwatcher.. but if you use this of do you run these command lines:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

before tha mining starts automatically ?