Quote from: abrgeza on Today at 06:12:51 AM

Quote from: anon2 on November 18, 2020, 07:26:08 PM

Quote from: abrgeza on November 18, 2020, 08:10:54 AM

Quote from: anon2 on November 17, 2020, 10:19:41 PM

Hy people!

I have a problem running more than 9 RX580 at my ashrock H110. It run with 12 cards till december 19, than I stopped mining. Now I startet again, but get always error in claymore and with phoenix is the same. The mainboard found more than 9 cards, but get errors when I try to run more than 9 cards. I have old blockchain drivers for the amd rx580 cards. So, do you think after upgrading will it be posible to run more than 9 cards, or will it be the same?
I did not upgrade now, because I don´t know if the system runs stable after upgrading? Last update was maybe 2018, after installing the system.
I have two riggs with the same components - both are running only 9 cards, more than 9 - error.

thank you for your replay
Anon

use 20.4.2 drivers, it works fine with 10 gpu rigs

Hi!
Thx for the answer! I did upgrade to this driver 20.4.2, but it is the same. The miner crashes, error something in phoenix. At Claymore error at gpu x, gpu y...
The system finds 12 gpu´s, but not posible to mine more than 9 gpu´s.

I can mix the 9 gpu´s at all 12 slots with also mixing the risers to know if the gpu´s are ok, the risers are ok and the gpu-slots at the mainboard are ok, no idea at the moment....

I tryed also with a brand new ashrock h110 btc plus, with also the driver 20.4.2, but phonix and claymore are not willing to mine...

Maybe motherboard bios update??

thank you
Anon

bios is ok if motherboard recognize gpus and you can install drivers for all cards.
Increase the Windows page file size to 65536 and try again.

You´re the best! Thank you very much! I had the page file size at 36000 for 12 GPU´s, as I changed at starting mining 2018...Now I changed to 65536, and runs with 11 at the moment, must try change the risers, because the motherboard H110 BTC founds not everytime all gpu´s.
When starting the pc new, the system founds sometimes 10, or 11, in very good cases 12...then must move a little bit the risers at the motherboard, and maybe then the motherboard will get all 12 gpu´s. It runs stable with 12 gpus for a very long time, no idea why it started to loose some gpus...

Thank´s again!!!

Phonix 5.1c did not mine at the moment, but claymore 15 does. So, to get Phonix running, will not be a very big thing.

Thank you!