Quote from: sandor111 on March 07, 2014, 06:04:21 PM

Quote from: Ruben383 on March 07, 2014, 05:05:45 PM

Can anyone steer me in the right direction? I was only able to set up 5 out of my 10 miners from Lightingasic because one of the power supplies were bad. The other 5 according to the LightingAsic dashboard, at 850 frequency, the miners are averaging 1700 khash/s, under status they are all running. But under the accepted section I get anywhere from one unit to four units that read 0% accepted. After about two hours the system log says, Please remove power, one or more miners are hanging. Then restarts but I am never able to get all the units to start accepting blocks. And according to my pool I have only earned .1099 Ltc in just under 24 hours.What I would like to know is if this is normal for now or are there some adjustments I can make to get all my miners to accept work?

The 0% is actually the reject rate.

Thanks for your response. So as long as I have 0% or close to 0% it is working correctly. I have all 10 miners on one psu and they are all running on scrypt only mode.