Can this program set the over clock for NVIDIA cards RTX 3060 before the Phoenix miner starts and then change the overclock settings after 5 minutes of the miner running?
The RTX 3060 ti cards run very stable on mem clock under +1000 of MSI after burner, (gets 59MH)
that is the only way to start to run them stable but after the DAG is created you can increase the Memclock to 1250 for 61.5MHs at that memory clock it can even go through Epoch change without much issue
the cards can easily go up to 64 MH with mem clock of +1500 but they wont pass epoch change like that.
I need a way to start the cards at low mem clock and change them to +1500 in 10 minutes or so and watch the cards Hash or failed shares , if they fall , it should restart the phonexi again with low mem and increase it in 10 min.
windows 10 64 here
Yes, you can try.
1) Setup MSI afterburner program with default OC for 59MH for Profile 1 and add it to Windows autorun
2) Use Cinfig.ini script file with values - ocprogram=2, profile=2 (with OC for 61.5MH), octimeout=120 (or more if you need more time to wait), lauchocprogram=1
Or you can buy premium version and setup it manually from Telegram using bot commands to change OC Profiles.
----------------------
Thank you for the info, That was very interesting,
1) Is there a way to reduce the 30 second delay before miner starts?
2) This does not help with miner Restart issue, but it helps with windows Restart.
I still have a problem if I restart Just the Phoenixminer, the over clock was already set too high, I need the OC to be set to Profile 1 (+950 mem clock) every time the miner starts and then switch to profile 2 (mem clock +1500) after 5 minutes of starting.
3) Is there a way to check the Hash rate of the GPU instead of the WHOLE rig?
4) Is there a way to check Failed Shares and restart the miner or windows if a certain number of Failed Shares detected?
THANK YOU