Quote from: Metroid on January 08, 2021, 11:13:17 PM

Quote from: skirch on January 08, 2021, 09:48:56 PM

EVGA GeForce RTX 3060 Ti XC

It does bring temps down a bit, no real reason to use 0 to + core as it only brings temps up and nothing more, up to -300 I don't see any downside on mh/s. I use hive os if it matters.

linux x windows again, i saw no benefits on windows clocking lower, temperature is the same because power limit is the same, if i lower the power limit clock drops however one of the cards it helped 1 power limit less from 61 to 60 and minus 100 clock speed but I think it helped because lowering 1 power limit more would be worse than core clock, so lets say if there was 0.5 power limit then i would find the perfect spot as we don't, manipulating clock speed helps to find that perfect spot if the power limit is not in the perfect spot, reason i said it helped one gpu the other no, there was one gpu at the perfect power limit, interesting.

Same hashrate = 100 mhs constant, no drops.

By the way the rtx 3080 evga ftw3 has memory sensors, so you can check the temperature, at moment is.

GPU 1

Code:

Date , GPU Clock [MHz] , Memory Clock [MHz] , GPU Temperature [°C] , Fan 1 Speed (%) [%] , Fan 1 Speed (RPM) [RPM] , Fan 2 Speed (%) [%] , Fan 2 Speed (RPM) [RPM] , Memory Used [MB] , GPU Load [%] , Memory Controller Load [%] , Video Engine Load [%] , Bus Interface Load [%] , Board Power Draw [W] , GPU Chip Power Draw [W] , MVDDC Power Draw [W] , PWR_SRC Power Draw [W] , PWR_SRC Voltage [V] , PCIe Slot Power [W] , PCIe Slot Voltage [V] , 8-Pin #1 Power [W] , 8-Pin #1 Voltage [V] , 8-Pin #2 Power [W] , 8-Pin #2 Voltage [V] , 8-Pin #3 Power [W] , 8-Pin #3 Voltage [V] , Power Consumption (%) [% TDP] , PerfCap Reason [] , GPU Voltage [V] , EVGA iCX GPU2 [°C] , EVGA iCX MEM1 [°C] , EVGA iCX MEM2 [°C] , EVGA iCX MEM3 [°C] , EVGA iCX PWR1 [°C] , EVGA iCX PWR2 [°C] , EVGA iCX PWR3 [°C] , EVGA iCX PWR4 [°C] , EVGA iCX PWR5 [°C] , EVGA iCX Right Fan [RPM] , CPU Temperature [°C] , System Memory Used [MB] ,
2021-01-08 21:44:29 , 1245.0 , 1310.7 , 56.0 , 70 , 1716 , 70 , 1714 , 4509 , 100 , 100 , 0 , 12 , 226.5 , 55.5 , 115.3 , 119.9 , 11.9 , 20.4 , 11.7 , 74.3 , 11.8 , 110.0 , 11.8 , 21.8 , 11.8 , 59.6 , 1 , 0.7180 , 65 , 65 , 66 , 68 , 53 , 56 , 60 , 71 , 60 , 1706 , 49.5 , 9406 ,

GPU 2

Code:

Date , GPU Clock [MHz] , Memory Clock [MHz] , GPU Temperature [°C] , Fan 1 Speed (%) [%] , Fan 1 Speed (RPM) [RPM] , Fan 2 Speed (%) [%] , Fan 2 Speed (RPM) [RPM] , Memory Used [MB] , GPU Load [%] , Memory Controller Load [%] , Video Engine Load [%] , Bus Interface Load [%] , Board Power Draw [W] , GPU Chip Power Draw [W] , MVDDC Power Draw [W] , PWR_SRC Power Draw [W] , PWR_SRC Voltage [V] , PCIe Slot Power [W] , PCIe Slot Voltage [V] , 8-Pin #1 Power [W] , 8-Pin #1 Voltage [V] , 8-Pin #2 Power [W] , 8-Pin #2 Voltage [V] , 8-Pin #3 Power [W] , 8-Pin #3 Voltage [V] , Power Consumption (%) [% TDP] , PerfCap Reason [] , GPU Voltage [V] , EVGA iCX GPU2 [°C] , EVGA iCX MEM1 [°C] , EVGA iCX MEM2 [°C] , EVGA iCX MEM3 [°C] , EVGA iCX PWR1 [°C] , EVGA iCX PWR2 [°C] , EVGA iCX PWR3 [°C] , EVGA iCX PWR4 [°C] , EVGA iCX PWR5 [°C] , EVGA iCX Right Fan [RPM] , CPU Temperature [°C] , System Memory Used [MB] ,
2021-01-08 21:46:54 , 1200.0 , 1310.7 , 64.0 , 70 , 1710 , 70 , 1710 , 4509 , 100 , 100 , 0 , 7 , 215.9 , 52.0 , 119.7 , 123.4 , 11.9 , 18.2 , 11.9 , 68.4 , 11.9 , 102.8 , 11.8 , 26.5 , 11.8 , 56.8 , 1 , 0.7120 , 73 , 72 , 74 , 74 , 60 , 64 , 66 , 79 , 67 , 1726 , 45.3 , 9350 ,

Incredible gddrx6 temperature, no more than 68c. Top of the line, worth it, the only issue is 3 x 8 pin power, 2 x 8 pin would have been just fine.

aren't the icx temperatures from external probes, rather than the internal temperature of the memory?