Quote from: dedizones on Today at 08:44:29 PM

Quote from: Kiawpqe on Today at 07:58:23 PM

Quote from: dedizones on Today at 05:55:34 PM

Quote from: Hacky71 on Today at 04:09:14 PM

I start mining ETH again and see that Claymore Miner is not running any more so i start to mine with Phönix miner- Hash Rate is good but i do need much electricity. I live in acountry with 30 cents/KWH. I have 5 RX580/8G -On Claymore i need 600 Watt in 2018 -now i need 1000 Watt/H -same settings in Overdrive N Tool than 2018 - I try write in BAT Datei cclock 1200 -mclock 2100 -cvddc 850 -mvddc 850 but bothing changed. Does ETH Mining need more power now or why is this so???

i have cclock 1220 -mclock 2020 -cvddc 825 -mvddc 825 => 145 on the wall.

Try lolminer or TMR ! for best KWH

145watt 1 rx-580 8 gb Huh

realy??
what Mh/s ?

i with cclock 1200 mclock 2015 ccddv 850 mvddc 875= 82/85 watt 32,66 Mh/s

Rig x7 Rx-580 8Gb

605/610 watt 227,2 Mh/s

Yes: don"t see in console watt, see on the wall with wattmeter

925watt on the wall, 7 gpus, cpu, b250 expert mining, 4 fans 140mm y with 227,2 Mh/s
your hash rate ?